Star Parts

REPLACEMENT TEETH & PILOTS FOR HDSF & HD AUGERS
Model	Description
160A-T04	Drive-In Flat Tooth
160A-T04HF	Drive-In Hard Faced Flat Tooth
160A-T09	Drive-In Gauge Tooth
160A-T09HF	Drive-In Hard Faced Gauge Tooth
160A-T08	Rubber Clip Lock for Drive in Teeth
160A-SB45	4.5” Wide Bolt-On Pilot
160A-SB45HF	4.5” wide Hard Faced Bolt-On Pilot
REPLACEMENT TEETH & PILOTS FOR ROCK AUGERS
Model	Description
160A-T10	Carbide Bullet Tooth
160A-11207	Replacement 0.765 Forged Bullet Tooth Pocket
160A-112000	Bullet tooth Puller
160A-BT500S	Bolt-On Bullet Tooth Rock Pilot (includes teeth)
160A-P04	Screw In Bullet Tooth Rock Pilot 2-3/8” API Sub (old style)”
REPLACEMENT TEETH & PILOTS FOR (OLD STYLE) DIRT
Model	Description
160A-T01	Bolt-On Flat Tooth
160A-T02	Bolt-On Hard Faced Flat Tooth
160A-T01B	5/8”X1-1/2” Carriage Bolt
160A-T01N	5/8”-11 Two Way Lock Nut
160A-SB45	4.5” wide Bolt-On Pilot
Auger Parts
Model	Description	Fits	Weight
160A-112007	0.765 Carbide Bullet Tooth Pocket	Rock Auger
160A-112042A	Replacement 2” Hex Coupler	All Augers	10
160A-113034	Housing Attachment Pin for Auger Drives-1-1/4X9-5/8	All Auger Drives	3.2
160A-HLP044	7/16” Lynch Pin (2 req)	All Auger Drives
160A-112452	Output Shaft Seal for Auger Drive	160D 1020/1530/2035 w/ Omni GB	0.5

Model	Description
660-A	Upper Section Complete,
660-12	Trolley Slide,
660-13	Trolley Slide Wear Pads,
660-14	Grease Zerks,
660-15	Trolley Pin Assy
660-151	Trolley Pin
660-152	Cotter Pins,
660-153	Trolley Pin Washers,
660-16	Trolley Pick Ring
660-17	Spring Guide Tube,
660-18	Compression Springs,
660-19	Upper Arm Cover Plate,
660-20	Hex Head Screw – m10x25,
660-21	Hex Head Screw – m10x35,

Model	Description
660-22	Left Slide rail
660-23	right slide rail,
660-24	Locking screw – m8x16,
660-25	Trolley stop pin,
660-251	Hairpin for trolley stop pin,
660-B	Lower Section Assy.
660-03
660-33	Tine T-Bolt,
660-34	End Plate,
660-341	End plate screw,
660-35	King post pin w/ locking ring,
660-351	King post pin only,
660-352	locking ring only,

Weld-On Blade - Plain No Holes
Model	Description	Fits	Weight
D40488	Blade. Sgl BVL FC 3/4 X 6 X 62-3/8” no holes	60” I.D. BUCKET	71 lbs
D12124	Blade, Sgl BVL FC 3/4 X 6 X 74-7/8” no holes	72” I.D. BUCKET	85 lbs
D14880	Blade, Sgl BVL FC 3/4 X 6 X 98-3/8” no holes	95” I.D. BUCKET	110 lbs.
Weld-On Punched Blade - w/ Holes 6” On Center
Model	Description	Fits	Weight
D42650	Blade, Sgl Bvl FC 3/4”X6”X62-3/8”w/10 holes	60” I.D. BUCKET	70 lbs.
D12308	Blade, Sgl BVL FC 3/4”x6”X74 3/8” w/12holes	72” I.D. BUCKET	82 lbs.
D15994	Blade, Sgl Bvl FC 3/4”X6”X97”w/16holes	95” I.D. BUCKET	110 lbs.
Bolt-On-Blade (Fasteners Included)
Model	Description	Fits	Weight
BOB60	Blade. Dbl Bvl FC 5/8x8x62-3/8 w/10 holes	60” I.D. BUCKET	79 lbs
BOB72	Blade. Dbl Bvl FC 5/8x8x74-7/8 w/12 holes	72” I.D. BUCKET	94 lbs.
BOB95	Blade. Dbl Bvl FC 5/8x8x97 w/16 holes	95” I.D. BUCKET	125 lbs.
BOB-01	Plow Bolt, 2 1/2” x 5/8” w/5/8” Hex Nylon Locking Nut	95” I.D. BUCKET	0.3 lbs
Fork Parts (specify fork manufacturer when ordering)
Model	Description	Fits	Weight
F001-CL2	Locking Pin Assy for ITA Class 2 Forks		0.6 lbs.
F001-CL3	Locking Pin Assy for ITA Class 3 Forks		0.6 lbs
F001-CL4	Locking Pin Assy for ITA Class Forks		0.6 lbs
Fork Retaining Pins for Slip-On-Fork Attachments
Model	Description	Fits	Weight
1000-0100	9-1/4”X3/4” Locking Pin w/Chain	old style	2 lbs
1000-0101	6-3/4”X3/4” Locking Pin w/Chain	1664 Frk Extns	2 lbs
1000-0102	7-3/4”X3/4” Locking Pin w/Chain	1665 Frk Extns	2 lbs
1000-0103	8-3/4”X3/4” Locking Pin w/Chain	1666 Frk Extns	2 lbs.
1000-0108	10-1/4”X1” Locking Pin (single) w/Chain	8” wide Frk Pkts	3 lbs
1000-0108DBL	Dual 10-1/4” x 1” Locking Pins w/Chain	8” wide Frk Pkts	5.2 lbs
1000-0111DBL	Dual 11-1/4” x 1” Locking Pins w/Chain	10” wide Frk Pkts	5.5 lbs
1000-0109	Hair Pin 3-1/2” X .177” dia		0.5 lbs.
Safety Work Platform Parts - C & G Series Only
Model	Description	Fits	Weight
1210C-071	TOP RAIL for 1210C - 113”	1210C / 1210G	19 lbs.
1210C-072	MID RAIL for 1210C- 55.75”	1210C / 1210G	7 lbs
1208C-071	TOP RAIL for 1208C - 91.5”	1208C / 1208G	17 lbs.
1208C-072	MID RAIL for 1208C	1208C / 1208G	6 lbs.
1206C-071	TOP RAIL for 1206C	1206C / 1206G	14 lbs.
1206C-072	MID RAIL for 1206C	1206C / 1206G	6 lbs.
1204C-071	TOP RAIL for 1204C	1204C / 1204G	12 lbs
1204C-071	TOP RAIL for 1204C	1204C / 1204G	12 lbs
1204C-072	MID RAIL for 1204C	1204C / 1204G	5 lbs
1200C-0011	SWP C Series Gate Latch Spring	All C & G Models
1200C-0020A	C Series Center Post	All C & G Models	8 lbs.
1200C-0036	Mid Rail Backing Plate	All C & G Models	0.25 lbs
1200C-051	HINGE SIDE GATE POST ASSY (NIC Hinges)	All C & G Models	15 lbs
1200C-052	LATCH SIDE GATE POST ASSY	All C & G Models	15 lbs
1200C-053	Gate Complete (NIC Hinges) SWP C series	All C & G Models	17 lbs
1200C-104804	Spring Gate Hinge w/attachment Hardware each	All C & G Models	0.5 lbs
1200C-66544	Latch Handle for SWP C Series Gate Latch	All C & G Models	0.25 lbs
1210C-01	Guard Rail Assy Complete for 1210C & 1210G	1210C / 1210G	125 lbs
1208C-01	Guard Rail Assy Complete for 1208C & 1208G	1208C / 1208G	125 lbs
1206C-01	Guard Rail Assy Complete for 1206C & 1206G	1206C / 1206G	125 lbs
1206C-01	Guard Rail Assy Complete for 1204C & 1204G	1204C / 1204G	120 lbs
HD Jib Parts
Model	Description	Fits	Weight
1360-06	Spring Action Pin Set for HD Jib	1340/1360(B)	2 lbs.
Self Dumping Hopper Parts
Model	Description	Fits	Weight
1800-10A	“Latch Assy with 16”” Handle (Does not include Hook Assy welded to back of hopper)”	1805 thru 1820	14 lbs.
1800-11A	16” Latch Handle only	1805 thru 1820	13 lbs.
1800-10B	“Latch Assy with 22”” Handle (Does not include Hook Assy welded to back of hopper)”	1825 thru 1850	15 lbs.
1800-11B	22” Latch Handle only	1825 thru 1850	15 lbs.
1800-12	Flipper Latch Lock Weldment	All	2 lbs
1800-12A	Latch Bracket (2 required)	All	3 lbs
1800-13	Latch Spring, 1.095OD X 6	All	3 lbs
1800-14	Hook Assembly (Welds to back of hopper)	All
1800-461AO	Rocker weldmnt w/ Rker Pins	1805N & 1810	16 lbs.
1800-1282AO	Rocker weldmnt w/ Rker Pins	1815 thru 1825	18 lbs.
1800-C324	Replacement Rocker Pins (8 required per side	All	0.25 lbs.
Safety Chain Components
Model	Description		Weight
1000-0203	5/16” Grade 100 plain finish chain - per foot		3 lbs.
1000-0242TL	Twist Lock Gr 80 Grab Hook for 5/16” Chain		0.93 lbs.
1000-0225	5/16”X3/8 Double Clevis Link Gr 70 6600 lbs. cap		0.81 lbs.
1000-0112	Anchor Block for 5/16” chain (requires welding)		0.25 lbs.
1000-0115	5/16' Safety Chain Assy- Incl 36" chain, Dbl Shackle & Locking Grab Hk		11 lbs.
Hooks, Shackles, and Pintle Hitches
Model	Description	Fits	Weight
1000-0233	1/2” - 2 Ton Bolted Anchor Shackle	4,000 lbs. Cap.	0.75 lbs
1000-0232	5/8”- 3 Ton Bolted Anchor Shackle	6,000 lbs. Cap.	1.5 lbs
1000-0231	3/4” - 7 Ton Bolted Anchor Shackle	14,000 lbs.Cap	3.75 lbs.
1000-0234	1-1/4” - 12 Ton Bolted Anchor Shackle	24,000 lbs.Cap	10 lbs
1000-0245	2 Ton Swvl Hook w/latch	4,000 lbs. Cap	2.25 lbs.
1000-0246BA	Replacement Latch for BA 2 ton hook		0.20 lbs
1000-0250	3 Ton Swvl Hook w/latch	6,000 lbs. Cap	2.5 lbs
1000-0251BA	Replacement Latch for BA 3 ton hook		0.20 lbs.
1000-0260	5 Ton Swvl Hook w/latch	10,000 lbs.Cap.	5 lbs.
1000-0261BA	Replacement Latch for BA 5 ton hook		0.20 lbs
1000-0265	7 Ton Swvl Hook w/latch	14,000 lbs.Cap.	11 lbs
1000-0266BA	Replacement Latch for BA 7 ton hook		0.25 lbs
1000-0280	Hook 11 ton swivel w/latch	22,000 lbs.Cap	13 lbs
1000-0281BA	Replacement Latch for Yoke 11 ton hook		0.25 lbs
1000-0305	Hitch, Pintle Hook 5 Ton Capacity	2K MVL	8 lbs.
1000-0306	Hitch, Pintle Hook 8 Ton Capacity	3K MVL	10 lbs.
1000-0307	Hitch, Combo w/ 2” Ball 8 Ton Capacity	3K MVL	13 lbs
1000-0308	Hitch Adapter 2.5”X12” 8 Ton Capacity	3.5K MVL	12 lbs.
1000-0309	Hitch, Pintle Hook 15 Ton Capacity	6K MVL	10 lbs.
1000-0301	Hitch Pin 5/8”x 4-1/4” with HP Cotter		0.5 lbs.
1000-0109	Hair Pin 3-1/2” X .177” dia

Brick Carts
Model	Description	Fits	Weight
200-01	B/B Cart Part 8in Fork		2.5 lbs.
200-02	B/B Cart Part 15in Fork		3.5 lbs
200-04	B/B Cart Part Wheel Bearing w/retainers		0.25 lbs
200-05	B/B Cart Part Steel Axle		6 lbs.
200-07	B/B Cart Part Axle Cotter Pin (1 required)
200-08	B/B Cart Part Hand Grips Set/2		0.5 lbs.
202-01	Tire, Wheel, & Bearing 13x6.5 4 Ply Tubeless		9.5 lbs
Replacement Casters and Wheels
Model	Description	Fits	Weight
1000-0501	Swivel Caster & wheel w/Brake	each	6.5 lbs.
1000-0505	Rigid Caster & Wheel	each	6 lbs.
1000-0509	Caster Pads Set of 4 (for field Installation)	set	4 lbs.
Replacement Casters and Wheels
Model	Description
1000-70111	Operator's Manual Canister 2.67 Dia
*****-05	Decal Kit for Any Attachment - Model #-05

Bucket Teeth
Model	Description	Fits	Weight
PBTA8023	2.25” Pin-On Tooth only	SS Bkts	2.25 lbs.
PBT1001	2 1/4” Tooth Adapter only (shank)	SS Bkts	4.0 lbs
PBTRP	Flex Pin Only 2.25” Pin-On Tooth	SS Bkts	0.09 lbs.
PBTA140	2.25” Pin-On Tooth Assembly	SS Bkts	6.5 lbs.
PBTA8023	2.25” Pin-On Tooth only	SS Bkts	2.25 lbs.
PBT1001	2 1/4” Tooth Adapter only (shank)	SS Bkts	4.0 lbs.
PBTRP	Flex Pin Only 2.25” Pin-On Tooth	SS Bkts	0.09 lbs.
PBTA140	2.25” Pin-On Tooth Assembly	SS Bkts	6.5 lbs.
Weld-On Blade - Plain No Holes
Model	Description	Fits	Weight
D40488	Blade. Sgl BVL FC 3/4 X 6 X 62-3/8” no holes	60” I.D. BUCKET	71 lbs
D12122	Blade. Sgl BVL FC 3/4 X 6 X 68-3/8” no holes	66” I.D. BUCKET	78 lbs.
D12124	Blade. Sgl BVL FC 3/4 X 6 X 74-3/8” no holes	72” I.D. BUCKET	85 lbs.
D50007	Blade. Sgl BVL FC 3/4 X 6 X 80-3/8” no holes	78” I.D. BUCKET	92 lbs.
D50009	Blade. Sgl BVL FC 3/4 X 6 X 86-3/8” no holes	84” I.D. BUCKET	99 lbs.
D14880	Blade, Sgl BVL FC 3/4 X 6 X 98-3/8” no holes	95” I.D. BUCKET	111 lbs.
Weld-On Punched Blade - w/ Holes 6” On Center
Model	Description	Fits	Weight
D42650	Blade, Sgl Bvl FC 3/4”X6”X62-3/8”w/10 holes	60” I.D. BUCKET	70 lbs.
D12306	Blade, Sgl Bvl FC 3/4”X6”X68-3/8”w/11 holes	66” I.D. BUCKET	75 lbs.
D12308	Blade, Sgl BVL FC 3/4”x6”X74 3/8” w/12 holes	72” I.D. BUCKET	82 lbs.
D50008	Blade, Sgl BVL FC 3/4”x6”X80 3/8” w/13 holes	78” I.D. BUCKET	91 lbs.
D50010	Blade, Sgl BVL FC 3/4”x6”X86 3/8” w/14 holes	84” I.D. BUCKET	97 lbs.
D15994	Blade, Sgl Bvl FC 3/4”X6”X97”w/16holes	95” I.D. BUCKET	110 lbs.
Bolt-On-Blade (Fasteners Included)
Model	Description	Fits	Weight
BOB60	Blade. Dbl Bvl FC 5/8x8x62-3/8 w/10 holes	60” I.D. BUCKET	79 lbs.
BOB66	Blade. Dbl Bvl FC 5/8x8x62-3/8 w/11 holes	66” I.D. BUCKET	86 lbs.
BOB72	Blade. Dbl Bvl FC 5/8x8x74-7/8 w/12 holes	72” I.D. BUCKET	94 lbs.
BOB78	Blade. Dbl Bvl FC 5/8x8x80-7/8 w/13 holes	78” I.D. BUCKET	104 lbs.
BOB84	Blade. Dbl Bvl FC 5/8x8x86-7/8 w/14 holes	84” I.D. BUCKET	111 lbs.
BOB95	Blade. Dbl Bvl FC 5/8x8x97 w/16 holes	95” I.D. BUCKET	125 lbs.
BOB-01	Plow Bolt, 2 1/2” x 5/8” w/5/8” Hex Nylon Locking Nut
Grapple Parts
Model	Description	Fits	Weight
170-0010	Hyd Cyl. for Root & Grapple Bkts w/1-1/4" pin	DG Grapples (check year)	15
170-0011	Hyd Cylinder, 2x10	All Models	15
170-0013DGB	Cylinder Cover for DG Grapples	Current DG Grapples	10
170-0013HDB	Cylinder Cover for all HD Grapples	Current HD Grapples	12
170-0014DG	Cylinder Cover for all DG Grapples	DG Grapples	10
170-0014HD	Cylinder Rod Cover for all HD Grapples	DG Grapples	14
170-0015B	Long Pivot Pin 5-5/8” x 1" dia. for Cyl Tower	Current Models	2
170-0016B	Short Pivot Pin 5-3/8” x 1" dia	Current Models	2
170-0015C	Long Pivot Pin 5-5/8” x 1.25" dia. for Cyl Tower	Current Models	2
170-0016C	Long Pivot Pin 5-5/8” x 1.25" dia. for Cyl Tower	Short Pivot Pin 5-3/8” x 1.25" dia.	2
170-0025	Mach Hose Set of Two 3/8”X72”Hoses	All Grapples	2
1000-0028	Flat Face QD Coupler Set for 1/2” Fitting	All Grapples	2
170-0030	Long Hyd Cyl Hose 3/8”X41”	60/66” HD/DG Grpls	1.75
170-0031	Short Hyd Cyl Hose 3/8”X30”	60/66” HD/DG Grpls	1.5
170-0032	Long Hyd Cyl Hose 3/8”X44”	72” HD/DG Grpls	1.75
170-0033	Short Hyd Cyl Hose 3/8”X35”	72” HD/DG Grpls	1.5
170-0040	Bulkhead Tee - 3/8” Male JIC	Fits All Grpls	0.2
170-0045	Hyd Fitting Cover		0.5
170-0040HD	HD Root Grapple Tine Weldment	HD Root Grapples
170-0040DG	DG Root Grapple Tine Weldment	DG Root Grapples
170-0040HD	HD Grapple Bucket Tine Weldment	HD Grapple Bkt
170-0040DG	DG Grapple Bucket Tine Weldment	DG Grapple Bkt
140-52	Spring, Hyd Hose Support 9" w/ Clsd Loop	Fits All Grpls
170-0042	"Drive-ln" Zerk for Grapple	Fits All Grpls

X-Treme Skid-Steer Trencher
Model	Description
131C	48" Combo Chain for Skid-Steer Trencher
131D	48" Dirt Chain for Skid-Steer Trencher
131R	48" Rock & Frost Chain for Skid-Steer Trencher

Mini Excavator
Model	Description
910-SC	Side Cutter PR
910-TA	Tooth Assembly

On this page

We offer a comprehensive range of Star Industries parts for our equipment attachments and storage solutions.

AUGER

CRANE

FORKLIFT

GENERAL PARTS

MASONRY

MINI EXCAVATOR

SKID-STEER